Masana'antar Gilashin Hasken Rana na Fuskar Hasken Rana ta ...

Lens ɗin daukar hoto na F-Theta mai tsawon inci 355nm. Hoton da aka nuna

Ruwan tabarau na F-Theta mai tsawon raƙumi UV 355nm Laser 420mmFL

Bayanin Samfurin

Ana amfani da ruwan tabarau na F-Theta Scan na 355nm a tsarin duba galvanometer don yin alama da laser; tare da ikon isar da wuri mai mahimmanci zuwa wurare da yawa a cikin filin duba. Hakanan muna samar da adaftar ruwan tabarau ga manyan masu samar da kan duba a duniya.

TheSL-355-300-420-D10-LPruwan tabarau ne mai inganci na UV F-Theta wanda aka tsara don tsarin alamar laser na 355nm da tsarin injina na micro. Tare da tsawon mai da hankali na 420mm da babban filin duba 300mm × 300mm, wannan ruwan tabarau ya dace da aikace-aikacen da ke buƙatar sarrafa yanki mai faɗi tare da babban daidaito.

Mahimman Bayanai

● Lambar Sashe:SL-355-300-420-D10-LP

● Tsawon Raƙuman Ruwa:355nm (UV)

● Tsawon Mayar da Hankali Mai Inganci (EFL):420mm

● Tsawon Mayar da Hankali Kan Flange (FFL):601.22mm

● Nisa Aiki (WD):523.56mm

● Filin Dubawa:300mm × 300mm

● Kusurwar Dubawa:±29°

● Tsawon Dubawa:424mm

● Diamita na Hasken Shigarwa (1/e²):10mm

● Girman Tabo (1/e²):27.06 – 30.84μm

● Watsawa:>93%

● Diamita na waje:Φ149mm

● Zaren Haɗawa:M85×1

● Jimlar Tsawon:92.6mm

● Tagar Kariya:Φ144mm × 3mm

● Kan Na'urar Dubawa:ScanCube 10

Fasali na Tsarin gani

■ Nisa mai nunin baya mai mai da hankali:121.27mm / 121.87mm

■ Nisa tsakanin M1 da M2:13mm

■ M2 zuwa tsakiyar ruwan tabarau:21.03mm

■ M2 zuwa gefen hawa:20.08mm

Samfuran da ake da su a cikin Jerin 355nm (EFL 100mm zuwa 420mm)

Lambar Sashe	EFL	Filin Dubawa	Hasken Shigarwa	Kusurwar Dubawa	Zaren Zare	FFL	WD
SL-355-50-100-D10-LP	100mm	50 × 50mm	10mm	±20.7°	M85×1	166.75mm	130.05mm
SL-355-110-160-D12	160mm	110 × 110mm	12mm	±28°	M85×1	220.04mm	189mm
SL-355-110-160-D10-LP	160mm	110 × 110mm	10mm	±27.8°	M85×1	253.25mm	213.35mm
SL-355-160-210D12	210mm	160 × 160mm	12mm	±28°	M85×1	282.16mm	247.22mm
SL-355-175-254-D10-LP-V1	254mm	175×175mm	10mm	±28°	M85×1	347mm	314.4mm
SL-355-175-254-D12	254mm	175×175mm	12mm	±25°	M79/M85×1	351.92/345.92mm	304mm
SL-355-175-254-LP	254mm	175×175mm	12mm	±25°	M79/M85×1	345.48/339.48mm	298.48mm
SL-355-210-300-D10-LP	300mm	210 × 210mm	10mm	±28.4°	M85×1	435mm	380mm
SL-355-220-330D12	330mm	220 × 220mm	12mm	±28°	M85×1	417.92mm	392.07mm
SL-355-250-360D12	360mm	250 × 250mm	12mm	±28°	M85×1	443.2mm	418.3mm
SL-355-250-360-D10-LP	360mm	250 × 250mm	10mm	±28°	M85×1	501.89mm	443.8mm
SL-355-300-420D12	420mm	300 × 300mm	12mm	±28°	M85×1	506.4mm	483.1mm
SL-355-300-420-D10-LP	420mm	300 × 300mm	10mm	±29°	M85×1	601.22mm	523.56mm

Aikace-aikace

✓ Alamar Laser ta UV da kuma zane-zane

✓ Babban tsarin sarrafa micromachining

✓ Tsarin PCB da semiconductor

✓ Alamar gilashi da filastik

✓ Babban yankewa da hakowa

Me yasa Za Ka Zaɓar SL-355-300-420-D10-LP?
Tare da tsawonsa na 420mm, filin daukar hoto na 300×300mm, da kuma watsawa sama da kashi 93%, wannan ruwan tabarau yana ba da kyakkyawan aiki ga sarrafa laser na UV mai girman yanki. Nisan aiki mai tsawo (523.56mm) yana ba da isasshen sarari don sarrafa kayan aiki da haɗa tsarin.