Masana'antar Gilashin Hasken Rana na Fuskar ...

Lens ɗin daukar hoto na F-Theta mai tsawon inci 355nm. Hoton da aka nuna

Ruwan tabarau na F-Theta mai tsawon raƙumi UV 355nm Laser 160mm FL

SL-355-110-160-D10-LP wani ruwan tabarau ne mai inganci na UV F-Theta wanda aka tsara don tsarin alamar laser na 355nm da tsarin injinan micro. Tare da ingantaccen tsawon mai da hankali na 160mm da filin daukar hoto na 110mm × 110mm, wannan ruwan tabarau yana ba da kyakkyawan aikin mayar da hankali ga nau'ikan aikace-aikacen laser na UV iri-iri.

Muhimman Bayanai:

Lambar Sashe: SL-355-110-160-D10-LP
Tsawon Raƙumi: 355nm (UV)
Tsawon Mayar da Hankali Mai Inganci (EFL): 160mm
Tsawon Mayar da Hankali ga Flange (FFL): 253.25mm
Nisa ta Aiki (WD): 213.35mm
Filin Scanning: 110mm × 110mm
Kusurwar Dubawa: ±27.8°
Tsawon Dubawa: 155.64mm
Diamita na Input Bead (1/e²): 10mm
Girman Tabo (1/e²): 13.2 – 42.4μm
Watsawa: >93%
Diamita na Waje: Φ103mm
Zaren Haɗawa: M85×1
Jimlar Tsawon: 57mm
Tagar Kariya: D76T3
Kan Na'urar Dubawa: SCANLAB 10

Fasali na Tsarin gani:

Nisa mai nunin baya mai mai da hankali daga A: 23.8mm, 50.9mm, 51.8mm
Nisa tsakanin M1 da M2: 12.54mm
M2 zuwa tsakiyar ruwan tabarau: 28.2mm
M2 zuwa gefen ɗagawa: 18.47mm

Bayani na Jeri - Ruwan tabarau na F-Theta na 355nm:
Ana amfani da ruwan tabarau na F-Theta mai girman 355nm a tsarin duba galvanometer don yin alama da laser, tare da ikon isar da wuri mai ma'ana zuwa wurare da yawa a cikin filin duba. Wavelength Opto-Electronic kuma yana samar da adaftar ruwan tabarau ga manyan masu samar da kan duba a duk duniya.

Sashe na lamba	EFL (mm)	Filin Dubawa (mm)	Kusurwar Dubawa (°)	Zaren Zare	Nisa Mai Mayar da Hankali ga Flange (mm)	WD (mm)
SL-355-50-100-D10-LP	100	50×50	±20.7	M85×1	166.75	130.05
SL-355-110-160-D12	160	110 × 110	±28.0	M85×1	220.04	189
SL-355-110-160-D10-LP	160	110 × 110	±27.8	M85×1	253.25	213.35
SL-355-160-210D12	210	160×160	±28.0	M85×1	282.16	247.22
SL-355-175-254-D10-LP-V1	254	175×175	±28.0	M85×1	347	314.4
SL-355-175-254-D12	254	175×175	±25.0	M79/M85×1	351.92/345.92	304
SL-355-175-254-LP	254	175×175	±25.0	M79/M85×1	345.48/339.48	298.48
SL-355-210-300-D10-LP	300	210 × 210	±28.4	M85×1	435	380
SL-355-220-330D12	330	220×220	±28.0	M85×1	417.92	392.07
SL-355-250-360D12	360	250×250	±28.0	M85×1	443.2	418.3
SL-355-250-360-D10-LP	360	250×250	±28.0	M85×1	501.89	443.8
SL-355-300-420D12	420	300 × 300	±28.0	M85×1	506.4	483.1
SL-355-300-420-D10-LP	420	300 × 300	±29.0	M85×1	601.22	523.56

Aikace-aikace:

Alamar Laser ta UV da kuma zane-zane
Babban mashinin micromachining mai inganci
Tsarin PCB da semiconductor
Alamar gilashi da filastik

Me yasa Zabi Jerin SL-355?
Tare da babban watsawa (> 93%), ƙirar da aka ƙera (jimlar tsawon 57mm), da kuma dacewa da SCANLAB 10 da sauran manyan tsarin galvo, SL-355-110-160-D10-LP zaɓi ne mai kyau don haɗa laser na UV.

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Ruwan tabarau na F-Theta mai ƙarfin 355nm

Ana amfani da ruwan tabarau na F-Theta Scan na 355nm a tsarin duba galvanometer don yin alama da laser; tare da ikon isar da wuri mai mahimmanci zuwa wurare da yawa a cikin filin duba. Hakanan muna samar da adaftar ruwan tabarau ga manyan masu samar da kan duba a duniya.