Tagogi na gani na Sin na Zinc Selenide (ZnSe) | 45° AOI, An rufe AR, don masana'antar masana'antar Lasers 10.6μm

Tagogi na Zinc Selenide (ZnSe) | 45° AOI, An Rufe AR, don Lasers Masana'antu 10.6μm Hoton da aka Fito

Tagogi na Zinc Selenide (ZnSe) | 45° AOI, An Rufe AR, don Lasers na Masana'antu 10.6μm

An gina wannan jerin tagogi masu kariya daga ZnSe, an inganta shi don tsarin laser mai ƙarfi na CO₂ mai ƙarfin 10.6μm. Tare da ingantaccen kwanciyar hankali na zafi da kuma shan ruwa mara kyau, suna iya sarrafa ayyuka masu wahala kamar yankewa, sassaka, walda, da ayyukan laser na likitanci cikin sauƙi.

Muhimman Bayanai:

Ingancin saman: 40-20 karce/haƙa
Fuskar bango: λ/4 a kowace 1 ″ diamita @ 632.8nm
Daidaito: ≤ mintuna 3 na baka
A bayyane budewa: >90%
Juriyar diamita: +0/-0.13mm
Juriyar kauri: ±0.25mm
Kusurwar aukuwa: 45°

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Madubin dubawa

Layin WZ ya ƙunshi diamita na yau da kullun daga 12.7 mm zuwa 180 mm da kauri daga 2.0 mm zuwa 6.0 mm (samfurin WZ‑0.5‑2 zuwa WZ‑180‑6). Waɗannan tagogi suna aiki a matsayin shingen kariya ga kawunan yanke laser na CO₂, tsarin canja wurin katako, da kuma wuraren rufe ido, suna kiyaye tsabtar gani na ciki yayin da suke kiyaye babban watsawa na 10.6‑μm.

Ana ba da shawarar ƙara murfin AR mai lamba biyu—zai iya rage hasken kowane saman zuwa <0.2% a 10.6 μm, yana inganta fitarwa da rage ruwan tabarau na thermal. Muna kuma bayar da rufin musamman da girma dabam dabam idan an buƙata.

Daga ƙananan kawunan 1.5″ zuwa manyan saitunan siffanta katako na 180 ‑mm, jerin WZ suna tabbatar da ingantaccen aiki, ƙarfi, da jigilar kaya cikin sauri. Dogara da daidaiton na'urorin ZnSe don tsawaita rayuwar laser ɗin CO₂ ɗinku.